←Module

Daily Pre-start

Polystyrene Processing · North Geelong
Critical-item classification has not yet been approved by HSEQ, so no item is treated as approved-critical. Failures are recorded and raise an issue, but will not force OUT OF SERVICE until criticality is approved in admin.

Line and shift

Site: North Geelong · Tuesday 18 August 2026, 11:56pm (recorded automatically)

Common checks

Every item needs a Pass or Fail. Any Fail needs a defect description and a photo.

1. Work area, exits, electrical panels and fire equipment are unobstructed.
2. Unprocessed and finished stock is within marked limits and separated from ignition sources.
3. Guards, covers, doors and interlocks are fitted, closed and undamaged.
4. Emergency stops, pull wires and stop controls are accessible and function-tested in accordance with the manufacturer procedure.
5. Conveyor is correctly tracked and free from material build-up at nip points.
6. Extraction/ventilation is operating and discharge paths are clear.
7. No unusual damage, loose fasteners, exposed wiring, leaks, burnt residue or overheated components are present.
8. Temperature controllers, alarms and displays appear serviceable; settings match the approved recipe.
9. Hot discharge cooling zone, tools, heat gloves and barriers are ready.
10. Forklift and pallet wrapper pre-starts are complete; pedestrian barriers are in place.
11. Correct empty pallet, base/top cardboard and wrapping film are available without blocking access.
12. Feedstock has been inspected and quarantine containers are available.
13. Communication method and emergency arrangements are understood by the operating team.

Operator authorisation to operate

Select a machine and complete every item.
Sign above with your finger or a stylus

Your signature is saved when you press Submit.

eCheck · Junk & Recycle Group ·